PEDOT:Nafion for Highly Efficient Supercapacitors.

Supercapacitors offer notable properties as energy storage devices, providing high power density and fast charging and discharging while maintaining a long cycling lifetime. Although poly(3,4-ethylenedioxythiophene) doped with poly(4-styrenesulfonate) (PEDOT/PSS) has become a gold standard among organic electronics materials, researchers are still investigating ways to further improve its capacitive characteristics. In this work, we introduced Nafion as an alternative polymeric counterion to PSS to form highly capacitive PEDOT/Nafion; its advantageous supercapacitive properties were further improved by treatment with either dimethyl sulfoxide or ethylene glycol. Accordingly, electrochemical characterization of PEDOT/Nafion films revealed their high areal capacitance (22 mF cm-2 at 10 mV/s) and low charge transfer resistance (∼380 Ω), together with excellent volumetric capacitance (74 F cm-3), Coulombic efficiency (99%), and an energy density of 23.1 ± 1.5 mWh cm-3 at a power density of 0.5 W cm-3, resulting from a more effective ion diffusion inside the conductive film, as confirmed by the results of spectroscopic studies. A proof-of-concept symmetric supercapacitor based on PEDOT/Nafion was characterized with a specific capacitance of approximately 15.7 F g-1 and impressive long-term stability (Coulombic efficiency ∼99% and capacitance ∼98.7% after 1000 charging/discharging cycles), overperforming the device based on PEDOT/PSS.

Iodonium-based pro-adhesive layers for robust adhesion of PEDOT:PSS to surfaces.

Electrochemical grafting of organic molecules to metal surfaces has been well-known as an efficient tool enabling tailored modification of surface at the nanoscale. Among many compounds with the ability to undergo the process of electrografting, iodonium salts belong to less frequently used, especially when compared with the most popular diazonium salts. Meanwhile, due to their increased stability, iodonium salts may be used in situations where the use of diazonium salts is constrained. The aim of this study was to examine the effect of the electrochemical reduction of iodonium salts on the physicochemical properties of Pt electrodes, and the possibility to form pro-adhesive layers facilitating further functionalization purposes. Consequently, we have selected four commercially available iodonium salts (diphenyliodonium chloride, bis(4-tertbutylphenyl)iodonium hexafluorophosphate, (4-nitrophenyl)(2,4,6-trimethylphenyl)iodonium triflate, bis(4-methylphenyl)iodonium hexafluorophosphate), and attached them to the surface of Pt electrodes by means of an electrochemical reduction process. As-formed layers were then extensively characterized in terms of wettability, roughness and charge transfer properties, and used as pro-adhesive coatings prior to the deposition of poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate), PEDOT:PSS. Due to the increase in hydrophilicity and roughness, modified electrodes increased the stability of PEDOT:PSS coating while maintaining its high capacitance.

Adhesion and charge transfer between PEDOT:PSS and the surface of the electrode are significantly improved by a simple electrode modification strategy using the electrochemical grafting of commercially available iodonium salts.

Naphthalene Phthalimide Derivatives as Model Compounds for Electrochromic Materials.

Electrochromism of organic compounds is a well-known phenomenon; however, nowadays, most research is focused on anodic coloring materials. Development of efficient, cathodic electrochromic materials is challenging due to the worse stability of electron accepting materials compared with electron donating ones. Nevertheless, designing stable cathodic coloring organic materials is highly desired-among other reasons-to increase the coloration performance. Hence, four phthalimide derivatives named 1,5-PhDI, 1,4-PhDI, 2,6-PhDI and 3,3'-PhDI were synthesized and analyzed in depth. In all cases, two imide groups were connected via naphthalene (1,5-PhDI, 1,4-PhDI, 2,6-PhDI) or 3,3'-dimethylnaphtidin (3,3'-PhDI) bridge. To observe the effect of chemical structure on physicochemical properties, various positions of imide bond were considered, namely, 1,5- 1,4- and 2,6-. Additionally, a compound with the pyromellitic diimide unit capped with two 1-naphtalene substituents was obtained. All compounds were studied in terms of their thermal behavior, using differential calorimetry (DSC) and thermogravimetric analysis (TGA). Moreover, electrochemical (CV, DPV) and spectroelectrochemical (UV-Vis and EPR) analyses were performed to evaluate the obtained materials in terms of their application as cathodic electrochromic materials. All obtained materials undergo reversible electrochemical reduction which leads to changes in their optical properties. In the case of imide derivatives, absorption bands related to both reduced and neutral forms are located in the UV region. However, importantly, the introduction of the 3,3'-dimethylnaphtidine bridge leads to a noticeable bathochromic shift of the reduced form absorption band of 3,3'-PhDI. This indicates that optimization of the phthalimide structure allows us to obtain stable, cathodic electrochromic materials.

UV-vis and ECD spectroelectrochemistry of atropisomeric naphthalenediimide derivative.

The UV-vis and ECD spectroelectrochemistry (SEC) of a chiral binaphthalenylamine derivative of the N-butyl naphthalenediimide (NDIB-NH2) enantiomers were applied to measure UV-vis and ECD spectra of NDIB-NH2 radicals and dianion formed in the reduction and oxidation processes observed in cyclic voltammetry (CV). The CV curves and EPR spectroelectrochemistry enabled us to establish conditions at which a radical-anion [NDIB-NH2]̇.-, a dianion [NDIB-NH2]2-, and a radical-cation [NDIB-NH2]̇.+ are formed. The DFT restricted open-shell CAM-B3LYP-D3/def2TZVP/PCM calculations demonstrated that in the radical-anion [NDIB-NH2]̇.-, spin is spread over the NDI system while in the radical-cation [NDIB-NH2]̇+ it is spread over the aminonaphthalene moiety. The UV-vis spectra of radical-anion and dianion show the most significant changes in the 400-800 nm range. In that range, the ECD spectra varied with the change of electrode potential more than the UV-vis did and enabled the identification of a new ECD band of [NDIB-NH2]̇.- at ca. 400 nm hidden in the background in the UV spectra at -1000 mV. A broad structured ECD pattern with a maximum at ca. 530 nm was observed for [NDIB-NH2]̇.- (-1000 mV), while a single smooth ECD band of [NDIB-NH2]2- was located at 520 nm (-1750 mV). For the first time, an isosbestic point (455 nm) was found in ECD spectroelectrochemical measurements for the radical-cation [NDIB-NH2]̇.+ in equilibrium with the NDIB-NH2 neutral form. The TD-DFT CAM-B3LYP-D3/6-31G** calculations combined with the hybrid (explicit combined with implicit) solvation model fairly well reproduced the UV-vis and ECD SEC of neutral and redox forms of NDIB-NH2 but the ECD spectrum of [NDIB-NH2]̇.+ above 390 nm.

C60ThSe2/ITO interface formation: photoemission-based charge-transfer recognition for organic electronics applications.

Within the presented work, we propose a complex photoemission-based approach for the investigation of the C60ThSe2 dyad (C60ThSe2)/indium-tin oxide (ITO) interface formation. For surface topography and basic morphology determination, atomic force microscopy was utilized, and the results showed that C60ThSe2 agglomerated into close-to-spherical crystallites and the island-like growth was the dominant type for fullerene growth on the ITO substrate. Further, detailed X-ray and UV-photoelectron spectroscopies (XPS, UPS) were used for thorough characterization of the chemical and electronic properties of the investigated structures. Experiments were conducted by means of cyclic voltammetry and UV-VIS techniques for both deposition purposes and for determination of the basic electronic structure. As a result, we present the detailed characterization of the chemical and energy structures with a clear designation of the mutual influence of both materials on their counterparts. Among others, the accurate photoemission signal decomposition of the overlapping signals was done with respect to obtaining the energy-related information depth. The obtained data clearly showed that an interface dipole (0.56 eV) was created between the ITO substrate and organic overlayer at the ultrathin coverage stage. Since our results point out the most probable charge-carrier relocation in the vicinity of the interface, this together with the dipole existence should be taken into account while creating energy-level cascades for various (e.g., photovoltaic or organic electronic) applications. The work may also provide insights for engineers working with a vast range of organic-based electronics while designing devices based on fullerene/ITO hybrid structures.

Electrochemically Deposited Zinc (Tetraamino)phthalocyanine as a Light-activated Antimicrobial Coating Effective against S. aureus.

Light-activated antimicrobial coatings are currently considered to be a promising approach for the prevention of nosocomial infections. In this work, we present a straightforward strategy for the deposition of a photoactive biocidal organic layer of zinc (tetraamino)phthalocyanine (ZnPcNH2) in an electrochemical oxidative process. The chemical structure and morphology of the resulting layer are widely characterized by microscopic and spectroscopic techniques, while its ability to photogenerate reactive oxygen species (ROS) is investigated in situ by UV-Vis spectroscopy with α-terpinene or 1,3-diphenylisobenzofuran as a chemical trap. It is shown that the ZnPcNH2 photosensitizer retained its photoactivity after immobilization, and that the reported light-activated coating exhibits promising antimicrobial properties towards Staphyloccocus aureus (S. aureus).

Chemical and Electronic Structure Characterization of Electrochemically Deposited Nickel Tetraamino-phthalocyanine: A Step toward More Efficient Deposition Techniques for Organic Electronics Application.

Phthalocyanines (Pc), with or without metal ligands, are still of high research interest, mainly for the application in organic electronics. Because of rather low solubility, Pc-based films are commonly deposited applying various advanced and demanding vacuum techniques, like physical vapor deposition (PVD). In this work, an alternative straightforward approach of NiPc layer formation is proposed in which NH2-side groups of nickel(II) tetraamino-phthalocyanine (AmNiPc) are engaged in the process of electrochemical deposition of (AmNiPc)layer on indium-tin oxide (ITO) substrates. The resulting layer is widely investigated by cyclic voltammetry, atomic force microscopy, UV-vis, and ATR-IR spectroscopies, X-ray diffraction, and photoemission techniques: X-ray and UV-photoelectron spectroscopies. The chemical and electronic structure of (AmNiPc)layer is characterized. It is shown that the electronic properties of the formed (AmNiPc)layer/ITO hybrid correspond to the ones previously reported for PVD-NiPc films.